Icom iC-7850 Скачать руководство пользователя страница 160

Страница: 160 / 282

9-5

VOICE RECORDER FUNCTIONS

For your reference:

• Holding down a key repeats the action until it is re

leased (other than the [

](F) key).

Example: Hold down [



](F) to repeat skipping 10

seconds until you release the [



](F) key.

(Default: 10 seconds)

• You can fast forward or rewind the file that is play

ing by rotating [MAIN DIAL]. The fast forward/re-
wind time is one twentieth of the total file time, re-
gardless of the skip time setting.

■

Operating while playing back

You can fast forward or rewind while playing back.

• Fast forward while playing

Push [



](F) to fast forward to the skip time point.

(Default: 10 seconds)

You can change the skip time in the Voice Set mode.

(p. 9-14)

VOICE

[F-2]



SET

[F-7]



QSO PLAY Skip Time

• Rewind while playing

Push [



](F) to rewind to the skip time point.

(Default: 10 seconds)

You can change the skip time in the Voice Set mode.

(p. 9-14)

VOICE

[F-2]



SET

[F-7]



QSO PLAY Skip Time

• If you push [



](F) within the first one second of the file,

the skip time at the end of the previously recorded file will
play back.

• Pause while playing

Push [

](F) to pause.

• Push [

](F) again to resume.

• Playing the previous file

Push [



](F) to play the previous file.

• In case there are other files in the folder, while the oldest

file is playing back, push [



](F) to start playing the begin-

ning of the file.

• Playing the next file

Push [



](F) to play the next file.

• In case there are other files in the folder, while the most

recent file is playing back, push [



](F) to stop the play-

back.

• Moving to the beginning of the previous file

When the playback is paused anywhere within the
file, push [



](F) one or more times to return to the

beginning of the file, and pause.

• Push [

](F) to playback.

When the playback is paused at beginning of a file,
push [



](F) to move to the beginning of the previous

file, and pause.

• Push [

](F) to playback.

• Moving to the beginning of the next file

When the playback is paused, push [



](F) to move

to the beginning of the next file, and pause.

• Push [

](F) to playback.

(F) Function keys

Rewind

Play the
next file

Play the
previous file

Forward

Pause or play

Stop playing

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды