Icom iC-7850 Скачать руководство пользователя

Страница: 133 / 282

6-16

SCOPE OPERATION

Audio scope screen (Continued)

■

Audio scope set mode

This set mode is used to set the FFT scope waveform
type, color, Waterfall display and oscilloscope wave-
form color.

Display the Audio scope screen, then hold down

[SET](F) for 1 second.

AUDIO

[F-6]



SET

[F-7]

• The Audio scope set screen is displayed.

Push [

](F) or [

](F) to select the desired item.

• Push [

] to select the contents for various items.

Rotate [MAIN DIAL] to select the option or set the

level.

• Hold down [DEF](F) for 1 second to select the default

option or level.

Push [EXIT/SET].

• Exits the Set screen.

[EXIT/SET]

[MAIN DIAL]

(F) Function keys

• Audio scope set screen

FFT Scope Waveform Type

(Default: Fill)

Select the type of waveform for the FFT scope.

• Fill: The waveform is drawn by only the color.
• Line: The waveform is drawn by only outline.

FFT Scope Waveform Color

(Default: (R) 51 (G) 153 (B) 255)

Set the waveform color for the FFT scope.

• The color is set in RGB format.
• Push [

](F) to select R (Red), G (Green) and B

(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.

• The color is displayed in the box beside the RGB

scale.

FFT Scope Waterfall Display

(Default: ON)

Turn the Waterfall display ON or OFF.

• OFF: Turns OFF the Waterfall display.
• ON: Turns ON the Waterfall display.

Oscilloscope Waveform Color

(Default: (R) 0 (G) 255 (B) 0)

Set the waveform color for the Oscilloscope.

• The color is set in the RGB format.
• Push [

](F) to select R (Red), G (Green) and B

(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.

• The color is displayed in the box beside the RGB

scale.

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды