Icom iC-7850 Скачать руководство пользователя

Страница: 128 / 282

6-11

SCOPE OPERATION

Waterfall Speed

(Default: MID)

Select the Waterfall speed.

• SLOW:

Sets the waterfall speed to SLOW.

• MID:

Sets the waterfall speed to MID.

• FAST:

Sets the waterfall speed to FAST.

Waterfall Size (Expand Scope)

(Default: Mid)

Select the Waterfall height in the Expand scope
screen.

• Small:

The same height with the Normal scope

screen, only the FFT scope expands.

• Mid:

The Waterfall height expands same ratio

with the FFT scope.

• Large:

Only the Waterfall height expands.

Waterfall Peak Color Level

(Default: Grid 10)

Select the signal level that the Waterfall displays a
peak color.
Higher signal levels are Red, Yellow, Green, Light-blue,
Blue and Black in order.

• Selection: Grid 1 ~ Grid 10

Waterfall Marker Auto-hide

(Default: ON)

Select the Waterfall Marker Auto-hide function ON or
OFF.

• OFF:

The marker in the Waterfall zone stays

ON.

• ON:

The marker in the Waterfall zone is hid

den 2 seconds after you have stopped it
in place.

Dual Scope Type

(Default: Over/Under)

When the Dual scope is selected, select the Main and
Sub scope layout.

• Over/Under: Displays the Main scope over the Sub

scope.

• Side by Side: Displays the Main and Sub scopes

side by side.

Waveform Type

(Default: Fill)

Select the outline waveform display for the Spectrum
scope.

• Fill:

The waveform is drawn only in color.

• Fill + Line: The waveform is drawn in color with an

outline.

Waveform Color (Current)

(Default: (R) 217 (G) 241 (B) 247)

Set the waveform outline color for the currently re-
ceived signals.

• The color is set in the RGB format.
• Push [

](F) to select R (Red), G (Green) and B

(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.

• The color is displayed in the box beside the RGB

scale.

Waveform Color (Line)

(Default: (R) 70 (G) 30 (B) 0)

Set the waveform outline color for the currently re-
ceived signals.

• The color is set in the RGB format.
• Push [

](F) to select R (Red), G (Green) and B

(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.

• The color is displayed in the box beside the RGB

scale.

Waveform Color (Max Hold)

(Default: (R) 58 (G) 110 (B) 147)

Set the waveform color for the received signals maxi-
mum level.

• The color is set in the RGB format.
• Push [

](F) to select R (Red), G (Green) and B

(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.

• The color is displayed in the box beside the RGB

scale.

Waterfall Display

(Default: ON)

Turn the Water fall display ON or OFF for the normal
scope or Mini scope screen. (In the Expanded scope
screen, the Waterfall is always displayed.)

• OFF:

Turns OFF the Waterfall display.

• ON:

Turns ON the Waterfall display.

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Похожие инструкции для iC-7850

Бренды по названию

Популярные бренды