Icom IC-7610 Скачать руководство пользователя

Страница: 20 / 101

2. ADVANCED OPERATIONS

Keyer set menu (CW-KEY SET)

In this menu, you can set the memory keyer repeat

time, dash weight, paddle speciications, key type,

and so on.

Setting example

1. Display the CW-KEY SET menu in the CW mode.

MENU

» KEYER > EDIT/SET >

CW-KEY SET

2. Select the setting item.
(Example: Side Tone Level)

3. Adjust the Side Tone Level.
(Example: 80%)

4. To close the CW-KEY SET screen, push

EXIT

several times.

TIP: How to reset to the default setting

Touching the item or its option for 1 second displays the
Quick menu, and then touch “Default” to reset to the
default setting.

Side Tone Level

(Default: 50%)

Adjust the CW side tone output level.

• Adjust to between 0 ~ 100%.

Side Tone Level Limit

(Default: ON)

Turn the CW side tone level limit ON or OFF.
This disables the CW side tone when you rotate

RF/SQL

(inner) above the side tone level.

Keyer Repeat time

(Default: 2sec)

Set the time between Memory keyer transmissions.

• Set to between 1 ~ 60 seconds.

After transmitting a Memory keyer, the transmission is
repeated after the set time period.

is displayed even between transmissions.

Dot/Dash Ratio

(Default: 1:1:3.0)

Set the dot/dash ratio.

• Set to between 1:1:2.8 ~ 1:1:4.5 in 0.1 steps.

Keying weight example:

Morse code “K”

2.8

〜

4.5

Default: 1:1:3

Setting range
1:1:2.8

1:1:4.5

Dash

Dot

Setting range

Space

Key action

TX output
power

Set TX output power

Rise time

Time

Rise Time

(Default: 4ms)

Set the rise time of the transmitted CW envelope.

• Set to 2, 4, 6 or 8 milliseconds.

Paddle Polarity

(Default: Normal)

Set the paddle dot-dash polarity to Normal or
Reverse.

• Normal: Right

dash, Left = dot

• Reverse: Right

dot, Left = dash

Key Type

(Default: ELEC-KEY)

Set the key type for the [KEY] connector on the rear
panel.

• Set to Straight, Bug or Paddle.

MIC Up/Down Keyer

(Default: OFF)

Set the microphone [UP]/[DN] keys to use as a CW
key.

• ON:

Use the [UP]/[DN] keys as a CW key.

• OFF:

Do not use the [UP]/[DN] keys as a CW key.

The [UP]/[DN] keys do not work as a “squeeze key.”

When “ON” is selected, you cannot change the frequency
and the Memory channels using the [UP]/[DN] keys.

Operating CW (ADVANCED) (Continued)

Содержание IC-7610






































































































Результаты поиска

Содержание IC-7610

Отзывы:

Похожие инструкции для IC-7610

Бренды по названию

Популярные бренды

Icom IC-7610, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-7610

Отзывы:

Похожие инструкции для IC-7610

Бренды по названию

Популярные бренды