manualshive.com logo in svg

Icom IC-7600, Инструкция по эксплуатации, Страница: 50 / 196

Поделиться
Скачать
Icom IC-7600 Скачать руководство пользователя страница 50

41

3

BASIC OPERATION

 

D

Drive gain adjustment

The drive gain is active for all modes, other than 

the 

SSB mode with speech compressor OFF.

Before transmitting, monitor your selected operating 
frequency to make sure transmitting won’t cause 
interference to other stations on the same frequency.

q

  Push 

[EXIT/SET] several times to return to the 

normal screen, if necessary.

w

  Push 

[SET] (F-6), then push [LEVEL] (F-1) to 

select the level set mode.

e

  Push 

[

Y

] (F-1) or [

Z

] (F-2) to select “Drive Gain” 

item.

r

 Push 

[METER] (MF2) to select the ALC meter.

t

  Push 

[PTT] (microphone in SSB with [COMP] ON, 

AM or FM), key down (CW) or push 

[TRANSMIT] 

(RTTY or PSK) to transmit.

y

  While talking into the microphone, keying down or 

transmitting, rotate the main dial so that the ALC 
meter reading is within 30% to 50% of the ALC 
scale. (p. 36)

  • Talk into the microphone at your normal voice level.

u

  Release 

[PTT], stop keying or push [TRANSMIT] 

again to return to receive.

i

 Push 

[EXIT/SET] to exit the display set mode.

Main dial

F-1

F-2

F-6

EXIT/SET

SET

METER

TRANSMIT

LEVEL /

Drive gain range

Содержание IC-7600





































































































































































































Отзывы:

Нет отзывов