Icom IC-7600, Инструкция по эксплуатации, Страница: 115 / 196

■
Saving a voice message into the USB-Memory
106
5
VOICE RECORDER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
The USB-Memory is not supplied by Icom.
EDIT
F-4
SAVE
F-6
F-5
T/R
F-1 F-2 F-4 F-3
DEL SPACE
Symbol ABC
123
F-1 EXIT/SET
DIR/FILE
Main dial
• V oice recorder RX memory scree n
• V oice file save screen— file name edit
F-2 F-4 F-3
REN DEL MAKE
• While sa ving
When a PC keyboard is connected to the [USB]
connector on the front panel, the file name can also
be edited from the keyboard.
In this case, a USB hub is required.
D Saving the received audio memory
The recorded RX memory contents can be saved into
the USB-Memory.
q
During voice recorder RX memory screen display,
push [SAVE] (F-5) to select voice file save screen.
• Previously selected screen, TX or RX memory, is
displayed. If the TX message (T1–T4) appears, push
[T/R] (F-6)
to select RX message.
w
Change the following conditions if desired.
• File name:
z
Push
[EDIT] (F-4) to select file name edit
condition.
• Push
[DIR/FILE] (F-1) several times to select the
file name, if necessary.
x
Push
[ABC] (MF6), [123] (MF7) or [Symbol]
(MF7) to select the character group, then
rotate the main dial to select the character.
•
[ABC] (MF6) : A to Z (capital letters), [123] (MF7):
0 to 9 (numerals),
[Symbol] (MF7): ! # $ % & ’ `
^ – ( ) { } _ – @ can be selected.
• Push [ Ω ] (F-1) to move the cursor left, push [ ≈ ]
(F-2) to move the cursor right, push [DEL] (F-3)
to delete a character and push
[SPACE] (F-4) to
insert a space.
c
Push [EXIT/SET] to set the file name.
• Saving location
z
Push [DIR/FILE] (F-1) to select tree view
screen.
x
Select the desired directory or folder in the
USB-Memory.
• Push [ Ω ≈ ] (F-4) to select the upper directory.
• Push
[ Y ] (F-2) or [ Z ] (F-3) to select folder in the
same directory.
• Hold down
[
Ω ≈
] (F-4) for 1 second to select a
folder in the directory.
• Push
[REN] (MF5) to rename the folder.
• Hold down [DEL] (MF6) for 1 second to delete the
folder.
• Hold down [MAKE] (MF7) for 1 second to making
a new folder. (Edit the name with the same
manner as the “• File name” above.)
c
Push
[DIR/FILE] (F-1) twice to select the file
name.
e
Push
[SAVE] (F-5).
• After the saving is completed, return to voice recorder
RX memory screen automatically.
D
Saving the TX memory
The TX memory contents can also be saved into the
USB-Memory. However, the contents are saved with
the message list, set mode conditions, etc. at the
same time. See page 147 for details.