Icom IC-7600, Инструкция по эксплуатации

Страница: 108 / 196

■
Recording a received audio
Up to 20 receive voice memories can be recorded in
the IC-7600. A total of 209 seconds of audio can be
recorded in receive messages.
However, the maximum recordable length of a single
message is 30 seconds.
This voice recorder records not only the received
audio, but also the information such as operating
frequency, mode, and the recording time for your
future reference.
D Basic recording
q
Push
[EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Select the desired mode.
e
Push
[VOICE] (F-2) to call up the voice recorder
screen.
• Previously selected screen, TX or RX memory, is
displayed. If the TX memory channel (T1–T4) appears,
push
[T/R] (F-6) to select an RX memory channel.
r
Hold down [REC] for 1 second to start recording.
• The operating frequency, mode and current time are
automatically programmed as the memory names.
t
Push [REC] momentarily to stop recording.
IMPORTANT!
Push
[REC] to stop recording before, or when
30 seconds has elapsed from the start of
recording.
The voice recorder memory records 30 seconds
(max.) of audio before
[REC] is pushed.
For example, when recording 40 seconds of audio,
the first 10 seconds audio will be overwritten with
the last 10 seconds, so that the total of audio
recorded is only 30 seconds.
When you record the 21st audio message, or when
the total audio length exceeds 209 seconds, the
oldest recorded audio is automatically erased to
make room for the new audio.
y
Push [EXIT/SET] twice to exit the voice recorder
screen.
NOTE: When transmit (or [PTT] is pushed) while
recording, no audio will be recorded.
D One-touch recording
To record the received signal immediately, one-touch
voice recording is available.
➥
Push [REC] momentarily to store the previous
15 seconds audio.
• The recordable time period can be set in the voice set
mode. (p. 105)
99
5
VOICE RECORDER FUNCTIONS
F-2 F-6 EXIT/SET
VOICE T/R
REC
The remaining time for recording
is displayed.
REC