3
BASIC OPERATION
3-7
Setting the frequency (Continued)
D
Entering a Band Edge
When “ON (User)” or “ON (User) & TX Limit” is
selected on the “Band Edge Beep” screen, you can
enter a total of 30 band edge frequencies.
L
Initially, all band edges are entered. Therefore, you must
first edit or delete them to enter a new band edge.
L
You cannot enter an overlapped frequency or a frequency
that is out of the preset transmit frequency.
1. Open the “Band Edge Beep” screen.
MENU
»
SET > Function >
Band Edge Beep
2.
Select “ON (User)” or “ON (User) & TX Limit.”
L
If you select “ON (User) & TX Limit,” you can limit
transmission to within the entered frequency range.
3.
Select “User Band Edge.”
“Band Edge Beep” screen
Rotate
Push
Rotate
Push
FUNCTION set screen
Editing a Band Edge
You can edit a band edge entered as a default or
when entering a new band edge.
1. On the FUNCTION set screen, select “User Band
Edge.”
2.
Touch the band edge you want to edit for 1
second.
(Example: 5: 14.000.000
–
14.350.000 MHz)
Rotate
Push
3.
Edit the lower band edge frequency.
(Example: 14.1)
4.
Touch [ENT] to save the edited lower band edge
frequency.
5.
Edit the upper band edge frequency.
(Example: 14.25)
6.
Touch [ENT] to save the edited upper band edge
frequency.
L
The edited band edge is saved and returns to the
previous screen.
TIP
:
•
You can also edit the frequency by rotating
MAIN DIAL
or
MULTI
.
•
Each band edge must be higher in frequency than the
ones above it. If you try to enter a lower frequency than
the edges above, the lower frequency edge will be
cleared when you push [ENT].
“User Band Edge” screen
Entry examples
•
14.025 MHz:
[1], [4], [
•
], [0], [2], [5], [ENT]
•
18.0725 MHz: [1], [8], [
•
], [0], [7], [2], [5], [ENT]
•
730 kHz:
[0], [
•
], [7], [3], [ENT]
•
5.100 MHz:
[5], [
•
], [1], [ENT]
•
7.000 MHz:
[7], [ENT]
•
Changing from 21.280 MHz to 21.245 MHz:
[
•
], [2], [4], [5], [ENT]
•
Opens the “User Band Edge” screen.
Previous view
