Icom IC-7300 Скачать руководство пользователя страница 123

Страница: 123 / 174

SET MODE

12-8

DATA OFF MOD

(Default: MIC,ACC)

Selects the connector(s) to input the modulation signal

when the data mode is OFF.

•MIC:

Uses the signal from [MIC].

•ACC:

Uses the signal from [ACC] (pin 11).

•MIC,ACC: Uses the signal from [MIC] and [ACC]

(pin 11).

•USB:

Uses the signal from [USB].

•MIC,USB: Uses the signal from [MIC] and [USB].

DATA MOD

(Default: ACC)

Selects the connector(s) to input the modulation signal

when the data mode is ON.

•MIC:

Uses the signal from [MIC].

•ACC:

Uses the signal from [ACC] (pin 11).

•MIC,ACC: Uses the signal from [MIC] and [ACC]

(pin 11).

•USB:

Uses the signal from [USB].

•MIC,USB: Uses the signal from [MIC] and [USB].

Touching the [DATA] key in the MODE screen

activates the data mode.

Automatically sets the modulation input to the

connector(s) selected in this item, for all three data

modes.

Externml Keypmd VOICE

(Default: OFF)

Enables voice memory transmission using an external

keypad.

•OFF: Turns OFF the function.

•

ON: Pushing one of the external keypad switches

transmits the content of voice memory (T1 ~

T4). (SSB/AM/FM mode)

Hold down the switch for 1 second to repeatedly

transmit.

Externml Keypmd KEYER

(Default: OFF)

Enables keyer memory transmission using an external

keypad.

•OFF: Turns OFF the function.

•

ON: Pushing one of the external keypad switches,

transmits the content of keyer memory (M1 ~

M4). (CW mode)

Hold down the switch for 1 second to repeatedly

transmit.

Externml Keypmd RTTY

(Default: OFF)

Enables RTTY memory transmission using an

external keypad.

•OFF: Turns OFF the function.

•

ON: Pushing one of the external keypad switches,

transmits the entered RTTY memory (RT1

~ RT4). (When the RTTY decode screen is

opened in the RTTY mode)

CI-V Bmud Rmte

(Default: Auto)

Selects the CI-V data transfer rate.

•

Options: 4800, 9600, 19200 (bps) or Auto

When “Auto” is selected, the baud rate is

automatically set according to the data rate of the

connected controller.

CI-V Address

(Default: 94h)

Selects the CI-V address.

•

Range: 02h ~ 94h ~ DFh

“94h” is the default address of IC-7300.

CI-V Trmnsceive

(Default: ON)

Turns the Transceive function ON or OFF.

•OFF: The status is not output.

•ON: The status is output.

When you change a setting on the

transceiver, the same change is automatically

set on other connected transceivers or

receivers, and vice versa.

CI-V USB→REMOTE Transceive Address

(Default: 00h)

Sets the address used to remotely control the

transceiver or receiver using the optional RS-BA1,

through the [USB] port.

The external equipment control signal is output from

the [REMOTE] port.

•

Range: 00h ~ DFh

TIP: When multiple devices mre connected.

The default transceive address is “00h.” To control

dedicated equipment (example IC-PW1) when several

devices are connected, set the same CI-V address.

CI-V Output (nor ANT)

(Default: OFF)

Enables outputting the antenna controller status

(frequency and so on) from the [REMOTE] port.

•OFF: Turns OFF the function.

•ON: Outputs the status.

Address “01h” is reserved.

The usable addresses are limited to 02h ~ DFh.

CI-V USB Port

(Default: Link to [REMOTE])

Selects the internal connection type between the

[USB] and [REMOTE] CI-V ports.

•Link to [REMOTE]:

The [USB] and [REMOTE] CI-V ports are

internally connected.

•Unlink from [REMOTE]:

The [USB] and [REMOTE] CI-V ports are not

internally connected.

Each port functions independently.

(duplex communication can be made.)

Connectors (Continued)

Previous view

Содержание IC-7300















































































































































































Результаты поиска

Содержание IC-7300

Отзывы:

Похожие инструкции для IC-7300

Бренды по названию

Популярные бренды

Icom IC-7300, Полное руководство

Результаты поиска

Содержание IC-7300

Отзывы:

Похожие инструкции для IC-7300

Бренды по названию

Популярные бренды