manualshive.com logo in svg

Icom IC-7300, Полное руководство

Поделиться
Скачать
Icom IC-7300 Скачать руководство пользователя страница 111

10

SCANS

10-7

Tone scan operation

By monitoring a signal on an HF/6 m repeater input 

frequency, the transceiver can determine the tone 

frequency required to access the repeater.

1.   While receiving a signal in the FM mode, push 

FUNCTION

 to open the FUNCTION screen.

2.  Touch [TONE] for 1 second.

 

 •Opens the TONE FREQUENCY screen.

3.  Touch [REPEATER TONE] or [T-SQL TONE].

 

 • Checks the repeater tone frequency or tone squelch 

frequency.

4.  Touch [T-SCAN] to start the Tone scan.

 

Blinks

While Tone scanning

Information

L

 • The selected tone frequencies are scanned, and 

“SCAN” blinks under the frequency readout.

 •The audio is muted.

 • The scan speed is slow when the squelch is 

open. And the speed is fast when the squelch is 

closed.

5.   When the tone frequency is detected, the tone 

scan pauses.

 • The tone frequency is temporarily set in the Tone 

memory.

6.  Touch [T-SCAN] to cancel the scan.

 

7.   To close the TONE FREQUENCY screen, push 

EXIT

.

Previous view

Содержание IC-7300















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды