6-10
6
FUNCTIONS FOR TRANSMIT
Split frequency operation (Continued)
■
D
Using the Quick split function
When you find a DX station that is operating Split,
an important consideration is how to set the split fre-
quency.
When you hold down
SPLIT
for 1 second, the split
function is set to ON, and the band, frequency and
mode of the undisplayed VFO is set the same as
those of the displayed VFO.
This shortens the time needed to start split frequency
operation.
Quick split operation is turned ON by default but can
be turned OFF in the Set mode. (p. 10-10)
The following is an example of setting 7.0620 MHz for
receiving and 7.0750 MHz for transmitting.
Select VFO A.
q
• Pushing
A/B
=
toggles VFO A and VFO B.
Set the frequency to 7.0620 MHz and mode to
w
LSB. (pp. 3-5, 3-11)
Hold down
e
SPLIT
for 1 second to turn ON the split
function and equalize the undisplayed VFO B band,
frequency and operating mode with the displayed
VFO A.
• “
” appears on the LCD.
Set the XFC (transmit frequency check) function
r
ON in the Set mode. (pp. 5-9, 10-11)
• The default setting is OFF.
While holding down
t
RIT
, rotate
[DIAL] to set the
transmit frequency to 7.0750 MHz.
Now you can receive on 7.0620 MHz and transmit
y
on 7.0750 MHz.
[DIAL]
A/B
2
=
3.5
SPLIT
3
7
7.0620 MHz (LSB)
XFC function is ON
Set mode
Set the transmit frequency to
7.0750 MHz.
Previous view
