Icom IC-7100 Скачать руководство пользователя страница 153

Страница: 153 / 375

D-STAR OPERATION <BASIC>

8-21

Directly inputting (RPT)

The destination repeater call sign can be directly input.

Example:

Directly input the call sign “JP3YDH”

Push

(

) to select the DR mode.

Check whether or not “TO” is selected.

• If “TO” is not selected, touch the “TO” field.

Touch the “TO” field.

• The “TO SELECT” screen appears.

Touch [

] to display the next page.

Touch “Direct Input (RPT).”

• The “DIRECT INPUT (RPT)” screen appears.

Touch the desired block one or more times to select

the desired character or symbol.

(Example: J)

• A to Z, 0 to 9 and / can be selected.
• Touch

“AB

⇔

12” to toggle between the Alphabet input

and Number input mode.

• Touch [CLR](

) to delete the selected character, symbol

or number.

• Touch “



” to input a space.

Touch [

](

) to move the cursor backwards, or

touch [

](

) to move the cursor forwards.

Repeat steps

and

to program a call sign of

up to 8 characters, including spaces, and then touch
[ENT](

(Example: First, J, then P, then 3, then Y, then D,

then H.)

• The transceiver returns to the DR mode screen, and

“JP3YDH” is displayed in “TO.”

• After programming, you can correct the call sign in the

DIRECT INPUT (RPT) screen.

• The programmed call sign remains on the DIRECT IN

PUT (RPT) screen, until inputting a new call sign.

The following settings are also correct.

* Although the repeater node letter is ‘B’ for 430 MHz band,

‘A’ is used in Japan. See page 8-1 for details.

If the programmed call sign is duplicated to the re-
peater list, the name is displayed. (Only when the
name has been programmed.)

The repeater node*
is input.

“/” is input.
In this case, the call sign is of
a repeater for a Gateway call.

“TO” (Destination) setting (Continued)

Program a call
sign, and touch
[ENT].

“K5TIT B” is set in “TO.”

“TO” is selected.

Touch
“TO.”

Touch
[

Touch
“ Direct Input

(RPT).”

eft

ight

enter

isplay

The

in the

instructions indicate the
part of the controller.

: Left side

: Right side

: Center bottom

: Display (Touch screen)

Previous view

Содержание IC-7100
























































































































































































































































































































































































Результаты поиска

Содержание IC-7100

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-7100, Расширенные инструкции

Результаты поиска

Содержание IC-7100

Отзывы:

Бренды по названию

Популярные бренды