Icom IC-7100 Скачать руководство пользователя страница 151

Страница: 151 / 375

D-STAR OPERATION <BASIC>

8-19

Using the TX History

The TX History stores the name and/or call sign of up
to 20 “TO” (Destination) settings that were used when
you made the calls.

NOTE:

If you never transmit a call in the DV mode,

you cannot select “TO” (destination) from the TX His-
tory.

Example:

Select the “Dallas” repeater in the TX His-

tory.

Push

(

) to select the DR mode.

Check whether or not “TO” is selected.

• If “TO” is not selected, touch the “TO” field.

Touch the “TO” field.

• The “TO SELECT” screen appears.

Touch [

] to display the next page.

Touch “TX History.”

• The “TX HISTORY” screen appears.

Touch the destination name or call sign.

• Example: “Dallas”
• The transceiver returns to the DR mode screen, and “Dal

las” is displayed in “TO.”

“Dallas” repeater’s
call sign is displayed.

If you push

QUICK

(

) on the TX HISTORY screen,

you can add the selected TX HISTORY data to mem-
ory, or delete it from there.

“TO” (Destination) setting (Continued)

“Dallas” is set in “TO.”

“TO” is selected.

Touch
“TO.”

Touch
“TX History.”

Touch
[

The Sub name is
displayed when
a repeater is se-
lected.

The

in the instructions indicate the

part of the controller.

: Left side,

: Right side,

: Center bottom

: Display (Touch screen)

Previous view

Содержание IC-7100
























































































































































































































































































































































































Результаты поиска

Содержание IC-7100

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-7100, Расширенные инструкции

Результаты поиска

Содержание IC-7100

Отзывы:

Бренды по названию

Популярные бренды