6
FUNCTIONS FOR TRANSMIT
6-8
L
eft
R
ight
C
enter
D
isplay
Split frequency operation
Split frequency operation allows you to transmit and
receive on two different frequencies. Split frequency
operation is performed using frequencies in VFO A and
VFO B.
• The Split frequency operation is automatically turned OFF
when turning ON the One-touch repeater function.
The following is an example of setting 21.290 MHz/
USB mode for receiving and 21.310 MHz/USB mode
for transmitting.
Set 21.290 MHz in VFO A and select the USB
q
mode.
Push
w
MENU
(
C
) one or more times to select the
“M-1” screen (M-1 menu).
Touch [SPLIT](
e
D
) to turn ON the Split function.
• The transmit frequency (VFO B) and “SPLIT” appear.
• If desired, tap [SPLIT](
D
) again to turn OFF the func-
tion.
Set 21.310 MHz in VFO B and select the USB mode.
r
The setting method has the three following ways.
(1) While holding down
XFC
(
R
) in VFO A, rotate the
Dial to set the transmit frequency to 21.310 MHz
in VFO B, and then select the operating mode to
USB.
• While holding down
XFC
(
R
), you can change the
frequency band and operating mode in VFO B.
• While holding down
XFC
(
R
), the transceiver re-
ceives the transmit frequency in VFO B.
(2) Touch [A/B](
D
) to select VFO B, rotate the Dial
to set the transmit frequency to 21.310 MHz, and
then select the operating mode to USB.
(3) Use the Quick Split function.
• The Quick Split function is much more convenient for
selecting the transmit frequency. See the next content
for details.
t
Now you can receive on 21.290 MHz and transmit on
21.310 MHz.
To change the transmit and receive frequencies, push
[A/B] to exchange VFO A and VFO B.
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
• While holding down
XFC
• After setting up
Split icon
Touch [SPLIT]
Shows the transmit frequency (VFO B)
Shows the transmit frequency (VFO B)
Shows the frequency shift and direction
Previous view
