Icom IC-705 Скачать руководство пользователя страница 42

Страница: 42 / 218

5-2

5. VOICE RECORDER FUNCTIONS

Playing back a QSO audio

You can playback the recorded QSO audio.

1. Insert the microSD card in which the recorded

audio is saved.

2. Open the PLAY FILES screen.

» RECORD >

Play Files

3. Touch the folder where the file you want to

playback is saved.

The folder is named in the following format:

yyyymmdd (yyyy: Year, mm: month, dd: day).

4. Touch the desired file.

• Starts a playback.

The file is named in the following format:

yyyy/mm/dd hh:mm:ss (yyyy: Year, mm: month,

dd: day, hh: hour, mm: minute, ss: second).

Playback continues to the next file and stops

when the last file in the folder is played back.

5. To close the PLAY FILES screen, push

several times.

Key

Action

Plays the previous file.

While the oldest file is playing back,

pushing

starts playing the beginning of

the oldest file, even if there are other files

in the folder, .

Plays the next file.

While the most recent file is playing back,

pushing

stops the playback, even if

there are other files in the folder.

Rewinds to the skip time point.

(Default: 10 seconds)

If you touch within the first 1 second of

the file, the end of the previously recorded

file will play back.

Fast forwards to the skip time point.

(Default: 10 seconds)
Pauses while playing

is displayed while pausing.

Plays the file.

is displayed while playing.

You can change the skip time in the following item.

» RECORD > Player Set >

Skip Time

Operating frequency and operating mode

Recording start

time and date

The number of file

The TX/RX

status of the

recorded audio

Total time

Play back time

Play back icon

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды