Icom IC-705 Скачать руководство пользователя

Страница: 174 / 218

14-28

14. D-STAR OPERATION (ADVANCED)

Entering new information into the repeater list

Editing repeater data

You can edit repeater data. This is useful when

already-entered data is incorrect, has changed,

or some data needs to be added to the list.
1. Open the REPEATER GROUP screen.

> DV MEMORY >

Repeater List

2. Touch a repeater group where the repeater

you want to edit is listed. (Example: 12: Japan)

3. Touch a repeater that you want to edit for 1

second. (Example: Hirano)

4. Touch “Edit.”

• The REPEATER LIST EDIT screen is displayed.

5. Touch an item, then edit it.

See pages 14-25 ~ 14-27 for details.

6. After editing, touch “<<Overwrite>>.”

• The confirmation dialog is displayed.

7. Touch [YES].

• The edited contents are saved into the repeater

list, and returns to the selected repeater group

screen.

8. To close the Repeater List screen, push

several times.

NOTE:

The currently selected repeater on the

DR screen cannot be edited. To edit the repeater,

select another repeater on the DR screen.

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды