Icom IC-705 Скачать руководство пользователя страница 163

Страница: 163 / 218

14-17

14. D-STAR OPERATION (ADVANCED)

Automatic Reply function

When a call addressed to your own call sign is

received, the Automatic Reply function sounds

beeps and automatically replies with your call

sign. (Default: OFF)

Depending on the setting, a recorded message

may be transmitted with the call sign.

1. Open the “Auto Reply” screen.

» SET > DV SET >

Auto Reply

2. Touch an option.

• ON: Automatically replies with your own call

sign. (No audio reply is sent)

• Voice: Automatically replies with your call sign

and an Auto Reply message recorded on

the microSD card (up to 10 seconds).

If no card is inserted, or no message

is recorded, replies with only your own

call sign (No audio reply is sent).

• Position: Automatically replies with your own

call sign and your position data using

the internal GPS receiver.

When “GPS Select” is set to “OFF”

or “Manual,” the internal GPS

receiver is temporarily turned ON.

» GPS > GPS Set

GPS Select

3. To close the “Auto Reply” screen, push

several times.

Auto Reply icon

• Returns to the standby screen, and displays the

Auto Reply icon.

When “ON” or “Voice” is selected, the Automatic

Reply function is automatically turned OFF,

when you push [PTT].

When “Position” is selected, the Automatic

Reply function remains ON, when you push

[PTT].

Example:

After receiving a call from “JM1ZLK,”

beeps sound and the transceiver

automatically sends a reply call.

The “TO” setting does not change, but

“UR: JM1ZLK (Caller’s call sign)” is

displayed.

NOTE:

The Automatic Reply function

temporarily sets the received call sign to “TO”

(destination).

TIP: To record the Auto Reply message

You can record the Auto Reply message. See

page 14-18 for details.

DV A-RPLY

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды