manualshive.com logo in svg

Icom IC-705, Руководство для продвинутых пользователей, Страница: 158 / 218

Поделиться
Скачать
Icom IC-705 Скачать руководство пользователя страница 158

14-12

14. D-STAR OPERATION (ADVANCED)

Viewing received call signs

*

1

  The icon differs, depending on the D-PRS TX format. 

GPS: Position  OBJ: Object 

ITEM: Item 

WX: Weather

*

2

  When a name is not entered in the DV Memory, the call 

sign is displayed.

When you receive a DV call, the calling station 

and the repeater call signs are saved. Up to 50 

calls can be saved. When you receive the 51st 

call, the oldest call history is deleted.

 

D

Viewing the call signs on the RX 

History screen

1.  Open the RX HISTORY screen. 

 »

2

 > 

CD

2.  Touch an RX history memory to view the details.

 

L

Information

 •The RX history number, the caller’s name (or call 

sign), destination, RX message, RX date and time, 

“GW,” and “GPS” are displayed.

 •“GW” is displayed when a Gateway call is received.

 •“GPS” is displayed when the received call includes 

position data.

 •“UP” is displayed when a repeater uplink signal is 

received.

 •In the QUICK MENU screen, you can select the 

following options.

RX>CS:

 

 Temporarily enters the 

received call sign into “TO.”

Call Sign Display:

 

 The received data is displayed 

in the Call Sign Display mode.

Name Display:

 

 The received data is displayed 

in the Name Display mode.

Add to RPT List:

 

 Adds the repeater’s call sign 

to the Repeater List.

Add to Your Memory:

  Adds the caller station’s call 

sign to Your Call Sign.

Delete:

 

Deletes the selected RX history.

RX HISTORY screen (RX01)

3.  Touch [DETAIL].

 • Displays the RX history detail screen.

 • Rotate 

 to select the page.

    <1st page>

 • CALLER:  Displays the caller station’s name*

2

 

and any note entered after the call 

sign.

 • CALLED:  Displays the called station’s name*

2

. 

L

  “CQCQCQ” is displayed when 

receiving a Local Area call or 

Gateway call.

  

    <2nd page>

 • RXRPT1:   Displays the repeater’s name*

2

 that 

was accessed by the caller station. If 

the received call was a Gateway call, 

this item displays the gateway call 

sign of the repeater you received the 

call from.

 • RX RPT2:  Displays the repeater’s name*

2

 you 

received the call from.

 

L

The operating frequency is displayed instead of 

the above items when the call was not through 

a repeater (Simplex call).

  

*

1

D-PRS information

 •Compass direction

 •Distance

 •D-PRS symbol

History 

number

RX 

message

Received  

date and time

Displayed when a 

Gateway call is received.

Caller station*

2

 

L

A note may be 

displayed after “/”.

Called 

station

Repeater name of 

the called station

Содержание IC-705



























































































































































































































Отзывы:

Нет отзывов