14-1
14� D-STAR OPERATION (ADVANCED)
“FROM” (Access repeater) setting
Your Access repeater must be set in “FROM” when you make a call on the DR screen.
You have 5 ways to select the Access repeater.
When you do not know which repeater you can access:
Search for a repeater using the DR scan
The Normal DR scan searches for output repeater frequencies or simplex
signals.
You can also find FM repeaters.
Search for the nearest repeater
The Near Repeater scans for the nearest repeater by using your location
and the repeater’s location, if it is entered in the Repeater List.
The nearest repeaters in your transceiver’s Repeater List are displayed as
selectable choices.
You can select a nearby DV or FM repeater type.
When the “FROM” data is saved in the TX History:
Select from the TX History
(p. 14-5)
Select a repeater that you have accessed before, from the TX History
record.
When you know your access repeater:
From the repeater list
(p. 14-2)
When your access repeater is in your transceiver’s repeater list, you can
select it by selecting the repeater area and name, if entered, or call sign.
By rotating
Select the preset repeater on the DR screen by touching “FROM” and then
rotating
.
Displayed while rotating
.
