23
7
OTHER FUNCTIONS
7
10
15
18
8
13
11
16
9
14
12
17
1
4
2
5
3
6
The receive channel frequencies can be set to between 400 and 520 MHz.
D
RX channel setting
The receive channels are set to “Disabled,” and are not displayed on the screen as the
default setting. You need to set the receive channels to “Enabled” to set the receive
frequencies.
■
RX frequency (For receive channels)
1. While holding down [SCAN] and [–], hold down
[
] to turn ON the transceiver.
•The “Receive” screen is displayed.
2.
Push [▲] or [▼] to select a receive channel
.
3. Select “Enabled,” and then push [ENT].
4. Hold down [
] to turn OFF the transceiver, and then
turn ON the transceiver again for the operating mode.
D
RX frequency setting
1.
Push [▲] or [▼] to select a receive channel that you
want to edit.
2. Open the “RX VFO” screen.
[MENU] >
RX VFO
3. Edit a receive frequency.
L
You can enter between 400 and 520 MHz. (12.5 kHz
steps)
TIP:
•
Push [▲] and [▼] to select a number.
•
Push [◄] and [►] to select a digit to edit.
4. Repeat step 3 to edit the receive frequency.
5. Push [ENT] to set it.
•Two beeps sound.
L
Push [CLEAR] to return to the previous screen.
