Icom IC-455, Инструкция по эксплуатации

Страница: 19 / 48

13
4
SCAN
4
7
10
15
18
8
13
5
11
16
9
14
6
12
17
1
2
3
■
Group Scan and Priority Scan
The Group and Priority scans repeatedly look for a signal on the Priority channel while
scanning the specified channels. You can use these scan modes when waiting for a call
on the Priority channel or several specified channels.
The Group and Priority scans are performed differently when transmitting. The Group
Scan can transmit on the Priority channel or on a busy channel, and the Priority Scan can
transmit only on the Priority channel.
1. Select “Group Scan” or “Priority Scan” in the “Scan
Mode” menu. (p. 11)
•“ ” is displayed on the operating screen when a Group
Scan is selected.
•“ ” is displayed on the operating screen when a Priority
Scan is selected.
2. Set the Priority channel, if necessary. (p. 7)
L
If the Priority channel is not set, the scan start channel
is monitored during a Priority Scan.
3. Push [SCAN] to start the scan.
•“ ” blinks when a Group Scan is selected.
•“ ” blinks when a Priority Scan is selected.
4. When receiving a signal, the scan pauses and
resumes, according to the selected Scan Resume
function. (pp. 12, 27)
5. Push [SCAN] to stop the scan.
Priority Scan is selected.
Group Scan is selected.
Scan start channel
Group Scan
Scan start channel
Priority Scan