I
QUICK REFERENCE GUIDE
■
Installation
D
Location
Select a location which can support the weight of the trans-
ceiver and does not interfere with driving in any way. We rec-
ommend the locations shown in the diagram below.
NEVER
place the transceiver where normal operation of the
vehicle may be hindered or where it could cause bodily injury.
NEVER
place the transceiver where air bag deployment may
be obstructed.
DO NOT
place the transceiver where hot or cold air blows di-
rectly onto it.
AVOID
placing the transceiver in direct sunlight.
D
Using the mounting bracket
➀
Drill 4 holes where the mounting bracket is to be installed.
• Approx. 5.5–6 mm (
1
⁄
4
″
) when using nuts; approx. 2–3 mm (
1
⁄
8
″
)
when using self-tapping screws.
➁
Insert the supplied screws, nuts and washers through the
mounting bracket and tighten.
➂
Adjust the angle for the clearest view of the function dis-
play.
IMPORTANT!
Detailed installation notes for Icom mobile transceivers to
be fitted into vehicles are available. Contact your Icom
dealer or distributor.
Nut
Spring washer
Flat washer
When using
self-tapping
screws
Spring
washer
Mounting
nut
Mounting
bracket
