Icom i9100, Инструкция по эксплуатации

Страница: 206 / 212

19
197
SPECIFICATIONS
■
General
• Frequency coverage : (unit: MHz)
Receive
0.030–60.000*
1
*
2
136.000–174.000* 1 * 2
420.000–480.000* 1 * 2
1240.000–1320.000
†
Transmit
1.800–1.999*
2 , 3.500–3.999* 2 ,
5.33050* 3 , 5.34650* 3 , 5.36650* 3 ,
5.37150* 3 , 5.40350* 3 ,
7.000–7.300*
2
, 10.100–10.150*
2
,
14.000–14.350*
2 , 18.068–18.168* 2 ,
21.000–21.450* 2 , 24.890–24.990* 2 ,
28.000–29.700* 2 , 50.000–54.000* 2
144.000–148.000*
2
, 430.000–450.000*
2
1240.000–1300.000
†
*
1
Some frequency bands are not guaranteed.
*
2
Depending on version. *
3
USA version only.
• Mode : USB, LSB, CW, RTTY, AM, FM,
DV*
*The optional UT-121 is required.
• No. of memory channels : 297CH
(99CH × 3 band)
(
396CH with UX-9100 ‡
;
99CH ×
4 bands)
• No. of scan edge
memory channels : 18CH
(6 × 3 band)
( 24CH with UX-9100 ‡
;
6CH × 4
bands
)
• No. of call channels : 3CH
(1 × 3 band)
( 4CH with UX-9100 ‡
;
1CH × 4
bands
)
• No. of Satellite
memory channels : 20CH
• Antenna connector : SO-239
×
3
Type-N
×
2
•
Antenna impedance : 50
ø
(at Antenna Tuner OFF)
•
Usable temperature range : 0˚C to +50˚C (+32˚F to +122˚F)
• Frequency stability : Less than ±0.5 ppm 5 min. after
power ON.
(0˚C to +50˚C; +32˚F to
+122˚F)
• Frequency resolution : 1 Hz
• Power supply : 13.8 V DC ±15%
(negative ground)
• Power consumption
Transmit
Max. power
: 24.0 A
(HF/50/144/430 MHz band)
9.0 A
(1200 MHz band)
†
Receive
Standby
: 3.0 A
(HF/50/144/430 MHz band)
4.0 A
(1200 MHz band)
†
Max. audio : 4.5 A
(HF/50/144/430 MHz band)
5.5 A
(1200 MHz band)
†
• Dimensions :
315(W)
×
116(H)
×
343(D) mm
(projections not included)
12.4(W)
×
4.57(H)
×
13.5(D) in
• Weight (approximately) : 11.0 kg; 24.2 lb
11.95 kg; 26.3 lb
(with UX-9100)
• ACC connector : 13-pin
• CI-V connector : 2-conductor 3.5 (d) mm (
1
⁄
8
″
)
■
Transmitter
• Output power
(continuously adjustable)
Frequency band Output power
HF/50 MHz 2 to 100 W (AM: 2 to 30 W)*
144 MHz 2 to 100 W
430 MHz 2 to 75 W
1200 MHz
†
1 to 10 W
(at 13.8 V DC/+25˚C)
* In the AM mode, transmission can be performed only on
the HF/50 MHz frequency band.
• Modulation system
SSB : Digital PSN modulation
AM : Digital Low power modulation
FM : Digital Phase modulation
DV* : GMSK Digital Phase modulation
*The optional UT-121 is required.
• Spurious emission
(Spurious domain)
HF bands : Less than –50 dB
50/144 MHz band : Less than –63 dB
430 MHz band : Less than –61.8 dB
1200 MHz band
†
: Less than –53 dB
(Out-of-band domain)
HF bands : Less than –40 dB
50/144/430 MHz band : Less than –60 dB
1200 MHz band
†
: Less than –50 dB
• Carrier suppression : More than 40 dB
• Unwanted sideband
suppression : More than 55 dB
(1200 MHz: More than 40 dB)
†
• ∂
TX variable range : ±9.999 kHz
• Microphone connector : 8-pin connector
• Microphone impedance : 600
ø
• ELEC-KEY connector :
3-conductor 6.35(d) mm (
1
⁄
4
″
)
• KEY connector :
3-conductor 6.35(d) mm (
1
⁄
4
″
)
• SEND connector : Phono jack
(RCA)
• ALC connector : Phono jack
(RCA)
†
The optional UX-9100 is required for 1200 MHz frequency band
operation.
‡
Only when the 1200 MHz frequency band is selected.