Icom i9100, Инструкция по эксплуатации

Страница: 121 / 212

112
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D Message Transmission
You can select a message channel (TM1–TM5) to turn
ON the message transmission function. When a mes-
sage channel is selected, the transceiver transmits the
pre-programmed text message. The default setting is
OFF.
q
Set the operating frequency, call signs and other
settings, such as those for repeater operation, as
desired.
w
In the DV mode, push [MENU] one or more times to
display the “M3” screen (Menu 3).
• In the DR mode, p
ush [MENU] once or twice to select
the “D1” screen.
e
Push [DSET](F-5) to display the “DSET” screen.
r
Push [TXM](F-3) to display the “TXM” screen
(Transmit message).
t
Rotate [MAIN DIAL] to select the desired transmit
message channel, then push [SET](F-5).
• TM1 to TM5 are selectable.
• When OFF is selected, the message is not transmitted.
y
Push [MENU] to return to the “DSET” screen.
u
Push [PTT] on the microphone to transmit the mes-
sage. (or push [TRANSMIT] on the transceiver)
• The message is transmitted each time you push [PTT]
(or [TRANSMIT]).
• The message is automatically transmitted every 30 sec
-
onds during continuous transmission.
• The MAIN Band TX/RX indicator lights red.
D RX message display
q
In the DV mode, push [MENU] one or more times to
display the “M3” screen (Menu 3).
• In the DR mode, push [MENU] once or twice to select
the “D1” screen.
w
Push [CD](F-2) to display the “CD” screen (Call Re-
cord).
e
Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
r
Push [
Z
](F-1) three times to select “MSG” item.
• The received message is displayed.
t
Push [
Z
](F-1) or [MENU] to return to the record
channel, selected in step
e
.
NOTE:
Up to 20 messages can be stored, but only
one message can be stored for each call sign.
The oldest message is cleared when 21st message
is received.
E D T
≈ TM1: TXM
S E T
[MAIN DIAL]
[MENU] [TXM]
[DSET]/[SET] [TRANSMIT]
MAIN Band
TX/RX indicator
✔
For your information
When a call with a message is received, the call sign
and the message scrolls across the function display.
The received call sign and/or message display func-
tions can be turned OFF in the DV SET mode, if de-
sired.
➥
“RX Message Disp” item (p. 119)
➥
“RX Call Sign Disp” item (p. 119)
[MAIN DIAL] [MENU]
[CD] [
√
]
CD ≈
JG3YMK
�
JA3YUA
RX01
CLR COPY Ú
CD MSG: REPEATER IS JP3
YHH A Ú
After selecting the record channel,
push [
Z
](F-1) three times.