111
8
DV MODE OPERATION
■
Message operation
D
TX message programming
The transceiver has a total of 5 message memories
to store short messages to transmit during DV mode
operation. Message of up to 20 characters can be pro-
grammed for each memory.
q
In the DV mode, push [MENU] one or more times to
display the “M3” screen (Menu 3).
• In the DR mode, p
ush [MENU] once or twice to select
the “D1” screen.
w
Push [DSET](F-5) to display the “DSET” screen.
e
Push [TXM](F-3) to display the “TXM” screen
(Transmit message).
r
Rotate [MAIN DIAL] to select the desired transmit
message channel.
• TM1 to TM5 and OFF are selectable.
t
Push [EDT](F-1) to enter the transmit message pro-
gramming mode.
• A cursor appears and blinks.
y
Push [F-1] one or more times to select the desired
character type.
Character type
Selectable characters
ABC
A to Z
abc
a to z
etc
! # $ % & \ ?
" ’ ` ^ + –
✱
⁄ . , : ; =
< > ( ) [ ] { } ¦ _ ¯ @
u
Rotate [MAIN DIAL] to select the first character to
input.
When inputting numbers or a decimal point, push
the appropriate keypad key.
• Push [DEL](F-4) to delete the selected character, sym
-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 20 characters have been
programmed, an
error beep sounds. If you want to reprogram, push [
Ω
]
(F-2) or [
≈
](F-3) to select a character, then push [DEL]
(F-4) to delete it.
i
Push [
Ω
](F-2) to move the cursor backward, or push
[
≈
](F-3) to move the cursor forward.
o
Repeat steps
y
through
i
to program a message
of up to 20 characters.
!0
Push [MENU] to save the programmed message.
While [SET](F-5) is blinking, push it to set the dis-
played channel as the first appearance channel
when [TXM](F-3) is pushed in step
e
.
TXM
≈
OFF
TXM
≈
TM1
：
E D T
S E T
A B C
TXM
≈
TM1
：HELLO
Ω
≈
D E L
S P C
[MAIN DIAL]
[MENU]
[TXM]
[DSET]
[EDT]
Rotate [MAIN DIAL]
A B C
TXM
≈
TM1
：HELLO
Ω
≈
D E L
S P C
Character type display
Cursor
[
Ω
] [
≈
]
[DEL][SPC]
[MAIN DIAL]
Number input
Character type
selection
• Programing a transmit message
Input a space
Delete a character
Move cursor forwards
Move cursor backwards
Character type selection
