109
8
DV MODE OPERATION
q
Select the desired frequency band. (p. 35)
w
Push [VFO/MEMO] to select the VFO mode.
e
Push [DV
•
DR] to select the DV mode.
r
Set the repeater’s transmit frequency, duplex direc-
tion and offset. (pp. 37, 65, 163)
t
Push [MENU] one or more times to display the “M3”
screen (Menu 3).
y
Push [CS](F-1) to display the “CS” screen (Call Sign).
u
Push [
Z
](F-1) to display the “UR” screen, and ro-
tate [MAIN DIAL] to select UR call sign, then push
[SET](F-4).
• First selecting the
call sign memory groups by pushing
[TS•GRP] or [GRP](F-5) makes it more convenient.
•
When calling CQ : Select a link repeater call sign for
sending CQ
•
When calling an individual station
: Select the station’s call sign
i
Push [
Z
](F-1) to display the “R1” screen, and rotate
[MAIN DIAL] to select the access repeater call sign,
then push [SET](F-4).
• First selecting the repeater call sign group makes it
more convenient, if you have programmed repeaters
into Groups. (p. 93)
• Push [NAME](F-4) to toggle the call sign and repeater
name display.
o
Push [
Z
](F-1) to display “R2,” and rotate [MAIN
DIAL] to select your gateway repeater call sign, then
push [SET](F-4).
!0
Push [
Z
](F-1)
to display “MY,” and set your own call
sign if necessary, then push [SET](F-4).
!1
Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
• The MAIN Band TX/RX indicator lights red.
!2
Release [PTT] to receive. (or push [TRANSMIT]
again)
• If another stations replies, it’s call sign will be stored in
the receive log.
• Received call signs can be automatically stored into the
received call record. See page 95 for details.
After setting, rotate [M-CH] to select a memory
channel, then hold down [MW] for 1 second to save
this temporary programmed data into the channel.
[TRANSMIT]
MAIN Band
TX/RX indicator
[MAIN DIAL]
[D
V•DR]
[MENU]
[VFO/MEMO]
[SET]
[
Z
]
[GRP]
UR
Ú
≈
UR
C L R
J G 3 Y M K
E D T
N A M E
G R P
R1
Ú
≈
R1
C L R
J P 3 Y H L
E D T
N A M E
G R P
UR
Ú
≈
GRP1
⁄
J P 1 Y I U
S E T
G R P
Rotate [MAIN DIAL]
R2
Ú
≈
R2
C L R
J P 3 Y H H
G
E D T
N A M E
G R P
MY
Ú
≈
MY1
C L R
J A 3 Y U A ⁄
E D T
N A M E
UR
Ú
≈
GRP1
C L R
⁄
J P 1 Y I U
E D T
N A M E
G R P
•
Calling CQ
through the gateway
•
Calling CQ
Repeater
q
：
JP3YHL
Repeater
e
：
JP3YHH G
Repeater
u
：
JP1YIU
CQ
q
w
e
r
t
y
u
i
My call sign
：
JA3YUA
Gateway
Gateway
Area
Zone A
Zone B
•
Calling an individual station
Repeater
q
：
JP3YHL
Repeater
e
：
JP3YHH G
Repeater
u
：
JP1YIU
Gateway
Gateway
Area
Zone A
Zone B
q
w
e
r
t
y
u
i
My call sign
：
JA3YUA
Station call sign
：
JM1ZLK
■
Repeater operation in the VFO (Continued)
D
Making a CQ call or a call to an individual station through gateway repeaters (Gateway call)
