94
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Receiving a D-STAR repeater
When the IC-9100 receives a signal from a D-STAR
repeater, it receives four call signs: the calling station’s
call sign, the called station’s call sign, the R1 repeater
call sign (the repeater that receives a signal from the
calling station on the uplink frequency), and the R2 re-
peater call sign (the repeater that transmits a signal
on the downlink frequency). You can copy the received
call signs into your radio, and reply to the call.
Station A
Station B
Repeater
446.000 MHz
445.400 MHz
445.400 MHz
446.000 MHz
Uplink
Downlink
(Transmit frequency)
(Receive frequency)
• Presetting
q
Select the desired frequency band. (p. 35)
w
Push [VFO/MEMO] to select the VFO mode.
e
Push [A/B] once or twice to select VFO A.
r
Set the desired repeater transmit (downlink) fre-
quency. (p. 37)
• Adjust the output power, if desired. (p. 46)
t
Push [MENU] to display the “M1” screen (Menu 1).
y
Hold down [DUP](F-2) for 1 second to turn ON the
One-touch repeater function.
• “T” and “DUP–” appear.
• The repeater receive (uplink) frequency appears at the
bottom of the function display.
u
Push [DUP](F-2) once or twice to switch the offset
to the desired direction.
• “DUP–” or “DUP+” appears.
• When the Auto Repeater function is in use, this selec
-
tion is not necessary (Only U.S.A. and Korean versions).
(p. 67)
i
Push [DV
•
DR] to select the DV mode. (p. 43)
•
“DV” appears.
• “T” disappears.
o
When a signal is received, the calling station’s call
sign is displayed on the LCD.
• If the calling station has programmed a note or mes
-
sage, it is displayed after the call sign.
See the next page to view the received call sign.
To reply to the calling station, see page 96.
[VFO/MEMO]
[A/B]
[DV
・
DR]
“T” disappears
Appears
M1
D U P
A G C
A F C
T O N
S C P
4 4 5 . 4 0 0 0 0
M1
D U P
A G C
A F C
D S Q
S C P
4 4 5 . 4 0 0 0 0
Appears
Uplink frequency
Appears