61
8
OTHER FUNCTIONS
New2001
New2001
New2001
■
Cloning function
Cloning allows you to quickly and easily transfer the entered
contents from a PC to a transceiver using the optional CS-
2730
cloning
software
, or enter contents from one trans-
ceiver to another one.
D
Cloning from a PC using a cloning cable
You can clone with the CS-2730
cloning
software
and the
optional cloning cable.
See the CS-2730 instruction manual for details. (downloaded
from the Icom WEB site; http://www.icom.co.jp/world/)
D
Cloning between transceivers
Connecting the master and sub transceivers
1.
Select a master transceiver to send data to a sub transceiver.
Connect them as shown below.
Turn OFF the master and sub transceivers.
q
Connect the OPC-474
w
cloning
cable
to the [SP2] jack of
the master and sub transceivers.
OPC-474
To [SP2]
To [SP2]
Master transceiver (Rear)
Sub transceiver (Rear)
Turn ON the master and sub transceivers.
e
Setting the sub transceiver
2.
Push [MENU
r
]
C
of the sub transceiver.
• Enters the MENU mode.
t
Rotate [DIAL]
S
to select “CLONE” (Clone).
(MENU-
EXMENU
> EXMEN-
OTHERS
> OTHER-
CLONE
)
Push [
y
ï
]
D
.
• Goes to the next tree level.
Rotate [DIAL]
u
S
to select “CLONE” (Clone Mode).
Push [
i
ï
]
D
.
• Displays “CLONE?.”
o
Rotate [DIAL]
S
to select “YES.”
!0
Push [
ï
]
D
.
• Enters the Clone mode.
