Icom F6400DS 11 Скачать руководство пользователя

Страница: 87 / 182

NXDN™ OPERATION

7-15

Receiving a call

Receiving an Individual call

1. When an Individual call is received:

•Mute is released.

•The Status indicator lights green.

• The calling station name (or ID) is displayed while

receiving the signal.*

2. Hold down [PTT], then speak into the microphone.

3. Release [PTT] to receive.

* Only for the Portable Ten-key and Simple key types and the

Mobile LCD types.

Receiving a Group call

1. When a Group call is received:

•Mute is released.

•The Status indicator lights green.

• The Group name and the calling station name (or ID)

are displayed while receiving the signal.*

When an All Call is received, “All Call” is displayed.*

In that case, you cannot reply to it.

2. Hold down [PTT], then speak into the microphone.

3. Release [PTT] to receive.

Receiving a Status message

1. When a Status message is received:

•Beeps sound.

• The Status message and the calling station or Group

name (or ID) are displayed.*

•“

” blinks.*

• “

” may be displayed or blink, depending on the

presetting.*

• Portable type transceivers may vibrate, depending on

the presetting.

2. Push [Back] to stop the display indication.

Receiving a Message

1. When a Message is received:

•Beeps sound.

• The Message and the calling station or Group name

(or ID) are displayed.*

•“

” blinks.*

• “

” may be displayed or blink, depending on the

presetting.*

• Portable type transceivers may vibrate, depending on

the presetting.

2. Push [Back] to stop the display indication.

Receiving a Call Alert call

1. When a

Call Alert call

is received:

•Beeps sound.

• “Call Alert” and the calling station or Group name (or

ID) are displayed.*

• “

” may be displayed or blink, depending on the

presetting.*

• Portable type transceivers may vibrate, depending on

the presetting.

2. Hold down [PTT], then speak into the microphone.

3. Release [PTT] to receive.

Receiving a Radio Check call

When a Radio check command is received,

the transceiver automatically transmits an

acknowledgement call. The RAN code matching may

not be necessary, depending on the presetting.

Receiving a Remote Monitor call

When a Remote monitor call is received, the

microphone audio is automatically transmitted for the

set time period. The RAN code matching may not be

necessary, depending on the presetting.

Previous view

Содержание F6400DS 11























































































































































































Результаты поиска

Содержание F6400DS 11

Отзывы:

Похожие инструкции для F6400DS 11

Бренды по названию

Популярные бренды

Icom F6400DS 11, Руководство по эксплуатации

Результаты поиска

Содержание F6400DS 11

Отзывы:

Похожие инструкции для F6400DS 11

Бренды по названию

Популярные бренды