BASIC OPERATION
3-4
3
When your system uses tone signaling, a call
procedure may be necessary prior to voice
transmission� The tone signaling employed may be
a selective calling system, which enables you to call
only specifi c stations, and prevents unwanted stations
from contacting you�
CTCSS, DTCS, Common ID must be the same on all
of your group transceiver to uses tone signaling�
1� Select a channel according to your system
operator’s instructions.
This may not be necessary, depending on the
presetting�
2�
Push [S-Ring], [S-Ring/C-Ring], [Call] or
[Call/C-Ring]�
3�
After transmitting, the remainder of your
communication can be carried out in the normal
way�
Selective calling
Non-selective calling
Selective calling
Non-selective calling
Call procedure
