Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 95 / 273

GPS OPERATION

5-12

Type of position data

GPS position data has two types of TX mode, D-PRS

and NMEA. Moreover, in the D-PRS mode, you can

select a TX format from Position (Mobile station/Base

station), Object, Item and Weather.

Type of position data for transmission

NMEA (p. 5-25)

D-PRS (p. 5-13)

Position (Mobile) (p. 5-15)

Item (p. 5-17)

Position (Base) (p. 5-15)

Object (p. 5-17)

Weather (p. 5-21)

•D-PRS: D-PRS is a function that simultaneously

sends position data received from the

internal or external GPS receiver, using the

slow speed data packet space, along with

voice.

•Mobile: A station operating from a vehicle, a vessel,

or other location, away from it's normal

base location.

You can transmit direction and speed

information.

•Base:

A station operating at home or in a building.

You can transmit the TX power level,

height, antenna gain and antenna direction

information.

•Object: Transmitting Object data such as an

earthquake information, satellite track

information, and so on.

An Object contains a time stamp.

•

Item:

Transmitting Item data such as a traffic

accident, lighthouse, antenna, or DV

access point location, and so on.

An Item does not contain a time stamp.

•Weather: A station transmitting weather information

received from a weather device.

•NMEA: A station transmitting position data

(NMEA0183) received from the internal or

external GPS receiver.

For users who have a D-STAR transceiver model

prior to the ID-4100A/E:

The GPS TX mode, “GPS (DV-G)” and “GPS-A (DV-

A),” are now called as “NMEA” and “D-PRS.”

• GPS (DV-G)



NMEA

• GPS-A (DV-A)



D-PRS

For users who have one of the following models:

( ID-800H, IC-91AD/E91, IC-U82, IC-V82, IC-7100,

ID-51A/E, ID-31A/E, IC-9100, IC-80AD/E80D, ID-

880H/E880, IC-92AD/E92D, IC-2820H/E2820)

When you receive a D-PRS position (Base),

Object, Item or Weather signal, position data is not

displayed.

Transmitting GPS data (D-PRS and NMEA)

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды