Icom D-STAR ID-4100A Скачать руководство пользователя страница 63

Страница: 63 / 273

D-STAR OPERATION

4-26

Auto Position Reply function

When you receive a call addressed to your own call

sign, but are in a situation that makes it difficult to

operate the transceiver, this function automatically

replies with your own call sign and transmits your

position data.

After receiving the Auto Position Reply call, the caller’s

position data is displayed in a window.

Only the Icom transceivers, ID-4100A/E, ID-

5100A/E, ID-51A/E PLUS, or ID-51A/E PLUS2,

displays the position after receiving a call. (As of

April 2017)

You can turn OFF the caller’s position indication.

(Display >

RX Position Display

) (p. 9-63)

After receiving a call addressed to your own call sign,

the internal GPS receiver is temporarily turned ON for

approximately 5 minutes to receive your position data,

even if “GPS Select” is set to “OFF,” “External GPS,”

or “Manual.” Then, the transceiver automatically

replies with a message, as described below.

When the internal GPS receiver is temporarily ON, and

valid position data is received, the transceiver transmits

your position data if a call addressed to your own call

sign is received again.

Reply message list when no valid position data is

received

Message

Status

No Position

When no position is received.

Old Position

2 minutes or more has

passed since receiving

position data.

No Posi & GPS Start

The internal GPS receiver is

temporarily turned ON, but

has not received your position

data yet.

Old Posi & GPS Start

The internal GPS receiver is

temporarily turned ON, and 2

minutes or more have passed

since receiving the position

data.

TIP:

• The position data is transmitted according to the

GPS TX mode.

(p. 9-24)

• When the GPS TX mode settings are incorrect

for the Automatic Reply function, the transceiver

automatically corrects them to reply to a call.

• When the GPS transmission mode is OFF,

“D-PRS” is automatically selected.

2. Your position data is

automatically transmitted.

Destination

(ID-4100A/E)

Your station

1. A call addressed to

your own call sign.

Scrolls your call sign or the TX

message.

Your status message may be

displayed.

3. After receiving,

the position data

is displayed in the

destination’s window.

Automatic Reply function (Continued)

When no valid position data is received

Scrolls your message

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Бренды по названию

Популярные бренды