Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 231 / 273

OTHER FUNCTIONS

10-15

Step 2. Remove the microSD card from the master

transceiver, then insert it into the sub

transceiver.

1. Hold down the master transceiver’s [ ] to turn

OFF the power.

2. Remove the microSD card from the master

transceiver.

3. Insert the microSD card into the sub transceiver,

then hold down the sub transceiver’s [ ] to turn

ON the power.

NOTE:

Before inserting, be sure to check the card

direction. If the card is forcibly or inversely inserted,

it will damage the card and/or the slot.

Master

Sub

TIP:

The setting data are saved in the “icf” file format

that is used in the CS-4100

cloning

software

When the saved data on a card is copied to a PC,

you can edit it with the cloning software.

Cloning function (Continued)

Transceiver-to-Transceiver cloning using a microSD card

This section describes the cloning method using a

microSD card. Memory channel contents, MENU

item settings and repeater lists can be saved onto the

microSD card.

Recorded voice memories are not included in the

cloning data. To play back the master transceiver’s voice

memory, insert the microSD card into a sub transceiver,

or make a copy onto the sub transceiver’s microSD card

using a PC.

Assumes that the microSD card has already been

inserted into the transceiver.

Step 1. Saving the master transceiver’s setting

data onto the microSD card.

SD Card >

Save Setting

1. Push [MENU].

2. Rotate [DIAL] to select “SD Card,” then push [

3. Select “Save Setting,” then push [

4. Select “<<New File>>,” then push [

•Displays the FILE NAME screen.

The file name is automatically named in the following

manner: Setyyyymmdd_xx (yyyy: Year, mm: month,

dd: day, xx: serial number)

Example: If a second file is saved on April 1, 2017,

the file is named “Set20170401_02.”

To change the file name, see “Save with a different

file name.” (p. 6-4)

5. Push [

•

The confirmation dialog “Save file?” is displayed.

6. Select <YES>, then push [

•Saves the data settings.

While saving, a progress bar is displayed, then

returns to the SD CARD screen after the saving is

completed.

7. Push [MENU].

• Returns to the standby screen.

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды