Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 214 / 273

MENU SCREEN

9-71

Custom Key

(Default: [PLAY]: ---, [FWD]: UP, [RWD]: DOWN)

Bluetooth Set > Headset Set > Icom Headset >

Custom Key

Assigns the following key functions to the Custom Key

([PLAY]/[FWD]/[RWD]) on the optional VS-3 headset.

Function

Description

---

No function

Push to increase the frequency,

Memory channel, repeater or select the

next station call sign.

DOWN

Push to decrease the frequency,

Memory channel, repeater or select the

previous station call sign.

VOL UP

Push to increase the volume level.

VOL DOWN Push to decrease the volume level.

SQL UP

Push to increase the squelch level.

SQL DOWN Push to decrease the squelch level.

Monitor

Push to open or close the squelch.

CALL

Push to select a call channel.

MR (000 CH) In the Memory mode, push to select

Memory channel 000.

MR (001 CH) In the Memory mode, push to select

Memory channel 001.

VFO/MR

Push to select between the VFO mode

and the Memory mode.

Push to turn the DR function ON or

OFF.

FROM/TO

(DR)

On the DR screen, push to select

between “FROM” and “TO.”

HOME CH

Push to directly select the Home CH

that is set to the selected mode (VFO/

Memory) or DR screen.

While in the CALL CH or Weather

channel mode, or when no Home CH

is set, an error beep sounds.

BAND/BANK

Push to select an operating band.

In the VFO mode, push to change the

operating band, and in the Memory

Bank mode, push to select Bank A ~ Z,

or OFF.

Only the entered bank is selectable.

SCAN

Push to start a scan.

While scanning, push to stop the scan.

Temporary

Skip

Push to set the frequency to be

skipped during scanning.

The selected frequencies are

temporarily skipped for faster scanning.

RX>CS

Hold down for 1 second to set the

last calling station’s call sign to “TO”

(destination).

Bluetooth

Set items (Continued)

Function

Description

SPEECH

Push to announce the frequency,

operating mode or call sign.

In the VFO, Memory and Call channel

mode, the frequency and the operating

mode are announced.

In the DR screen, the call sign is

announced. If Simplex is selected, the

frequency is announced.

MODE

Push to change the operating mode.

LOW

Push to change the transmit power

level.

DUP

Push to turn the Duplex mode ON or

OFF, and the shift direction to DUP+ or

DUP–.

PRIO

Push to turn the Priority watch ON or

OFF.

TONE/DSQL

Push to select between tone types.

<<MODE>> FM/FM-N

TONE:

Repeater Tone

TSQL

: Pocket Beep with Tone

Squelch

TSQL:

(Tone Squelch)

DTCS

: Pocket Beep with DTCS

Code Squelch

DTCS:

DTCS Code Squelch

TSQL-R: Reverse Tone Squelch

DTCS-R: Reverse DTCS Code

Squelch

DTCS (T) (“DTCS” blinks):

TX:DTCS, RX:OFF

TONE (T)/DTCS (R)

(“T-DTCS” is displayed, “T” blinks.):

TX:TONE, RX:DTCS

DTCS (T)/TSQL (R)

(“D-TSQL” is displayed, “D” blinks.):

TX:DTCS, RX:CTCSS

TONE (T)/TSQL (R)

(“T-TSQL” is displayed, “T” blinks.):

TX:TONE, RX:CTCSS

<<MODE>> DV

You can set this setting on the DR

screen.

DSQL

: Pocket Beep with Digital

Call sign Squelch

DSQL:

Digital Call sign Squelch

CSQL

: Pocket Beep with Digital

Code Squelch

CSQL:

Digital Code Squelch

In the VFO mode or on the DR screen,

hold down to save the displayed

frequency into a Memory blank

channel.

MUTE

Push to turn the Mute function ON or

OFF.

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды