Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 192 / 273

MENU SCREEN

9-49

Fast Data

(Default: OFF)

DV Set > DV Fast Data >

Fast Data

Select whether or not to use the DV Fast Data function

for data communication in the DV mode.

The DV Fast Data function uses the data and the

audio frames to send data approximately 3.5 times

faster than the normal speed. So, no audio can be

sent.

•OFF: Sends data at the slow speed (approximately

950 bps).

•ON: Sends data at the fast speed (approximately

3480 bps).

Even if “ON” is selected, while holding down [PTT],

the data is sent at the slow speed, because the

audio frame is used for the microphone audio

transmission and the audio transmission has

priority.

The GPS data speed is set in “GPS Data Speed.”

GPS Data Speed

(Default: Slow)

DV Set > DV Fast Data >

GPS Data Speed

Set the GPS data speed when the data is sent using

the DV Fast Data function.

When you send the GPS data to other transceivers

that can receive only slow speed data, set to

“Slow.”

•Slow: Sends GPS data in the slow speed

(approximately 950 bps).

•Fast: Sends GPS data in the fast speed

(approximately 3480 bps).

TX Delay (PTT)

(Default: 2sec)

DV Set > DV Fast Data >

TX Delay (PTT)

Set the TX delay time.

In the data communication mode and after releasing

[PTT], the transceiver automatically sends the data

using the DV Fast Data function for this set period.

•OFF:

After releasing [PTT], the transceiver

returns to receive.

•1 ~ 10sec: After releasing [PTT], the transceiver

sends data by using the DV Fast Data

function for this set period.

The transceiver automatically returns to

receive when the TX data is completely

sent, or when this set period ends,

whichever is sooner.

NOTE:

This function is usable only when “DV Data

TX” is set to “PTT.”

Digital Monitor

(Default: Auto)

DV Set >

Digital Monitor

Select a receive mode when [MONI] is pushed in the

DV mode.

•Auto: Receives in the DV mode or the FM mode,

depending on the received signal.

•Digital: Receives in the DV mode.

•Analog: Receives in the FM mode.

Digital Repeater Set

(Default: ON)

DV Set >

Digital Repeater Set

Turn the Digital Repeater Setting function ON or OFF.

In any DV mode except when using the DR function,

and when accessing a repeater that has a call sign

that is different than the transceiver’s setting, this

function reads the repeater’s signal and automatically

sets the repeater call sign in R1 and R2.

•OFF: Turns OFF the function.

•ON: Automatically sets the repeater call sign.

DV Auto Detect

(Default: OFF)

DV Set >

DV Auto Detect

Turn the DV mode automatic detect function ON or

OFF. If you receive an FM signal in the DV mode, this

function temporarily switches to the FM mode.

•OFF: Turns OFF the function. The operating mode

is fixed to the DV mode.

•ON: Automatically selects the FM mode for

temporary operation.

RX Record (RPT)

(Default: ALL)

DV Set >

RX Record (RPT)

The transceiver can record the data of up to 50

individual calls. When the received signal includes a

status message (“UR?” or “RPT?”) that is sent back

from the access repeater, you can record up to 50

messages, or only the last call, in the Received Call

Record.

•ALL:

Records up to 50 calls.

•Latest Only: Records only the last call.

DV Set items (Continued)

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды