Icom D-STAR ID-4100A Скачать руководство пользователя страница 183

Страница: 183 / 273

MENU SCREEN

9-40

GPS items (Continued)

GPS Logger

(Default: OFF)

GPS > GPS Logger >

GPS Logger

Turn the GPS Logger function ON or OFF.

This function logs the position, altitude, course, speed

and number of satellites being used.

•OFF: Turns OFF the function.

•ON: The transceiver automatically logs GPS data.

Once this function is turned ON, the GPS data

will be continuously logged until turning it OFF,

even if the transceiver power is turned OFF,

then ON again.

This function requires a microSD card (User

supplied).

When “GPS select” is set to “OFF” or “Manual,” this

function does not save the log.

TIP:

The log data is saved on the microSD card. The

file name is automatically created, as shown below:

•Log start date and time: 1st April 2017 15:30:00

•File name:

20170401_153000.log

Record Interval

(Default: 5sec)

GPS > GPS Logger >

Record Interval

Select the GPS Logger function record interval of 1, 5,

10, 30, or 60 seconds.

Record Sentence

(Default:

✔

RMC/

✔

GGA/

✔

VTG/

✔

GSA)

GPS > GPS Logger >

Record Sentence

Set the GPS Logger function record sentence to

RMC, GGA, VTG, or GSA.

•Displays “

✓

” when the sentence is set to ON.

NOTE:

Select at least one sentence, otherwise an

error beep will sound.

GPS Auto TX

(Default: OFF)

GPS >

GPS Auto TX

Select an option for the GPS automatic transmission

function.

This function automatically transmits the current

position data received from a GPS receiver, as well as

any entered GPS message, at the selected interval.

•OFF:

Does not automatically transmit

the position data. (When you push

[PTT], the transceiver transmits the

position data.)

•5 sec to 30 min: Transmits the current position data

at the selected interval (5*, 10, or

30 seconds, or 1, 3, 5, 10, or 30

minutes).

* Not displayed when you set four GPS

sentences in “GPS Sentence.”

NOTE:

When the GPS transmit mode is “NMEA,” set

the “GPS Select” item to “Internal GPS” or “External

GPS.” If you set to “Manual” or “OFF,” the current

position data will not be automatically transmitted.

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды