Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 182 / 273

MENU SCREEN

9-39

Alarm Select

(Default: OFF)

GPS > GPS Alarm>

Alarm Select

Select the target position(s) for the GPS alarm

function.

•OFF:

Turns OFF the function.

•RX:

The GPS alarm sounds when a target (the

last received position) enters in your active

alarm range, .

•Group: The GPS alarm sounds when a target

(positions in the GPS memory, or in the

selected GPS memory group) enters in

your active alarm range.

•Memory: The GPS alarm sounds when a target (the

specified position in the GPS memory)

enters in the active alarm range.

Alarm Area (Group)

(Default: 0.25')

GPS > GPS Alarm>

Alarm Area (Group)

Set the GPS active alarm range.

When a target enters in the specified active alarm

range, the GPS alarm sounds and the GPS alarm icon

blinks.

When “Alarm Select” is set to “Group,” this setting is

enabled.

Ranges differs, depending on the “Position Format”

setting.

Position Format = dddºmm.mm'

Ranges: 00.08' to 59.99' (0.01' steps)

Position Format = dddºmm'ss''

Ranges: 00'05'' to 59'59'' (0’01" steps)

Example:

When a target enters in the active alarm range, the

GPS alarm sounds and the GPS alarm icon blinks.

0.25’

Your

position

Beeps three times

Point A

Point B

Point C

Alarm Area (RX/Memory)

(Default: Both)

GPS > GPS Alarm>

Alarm Area (RX/Memory)

Select the GPS active alarm range.

When a target enters in the active alarm range, the

GPS alarm sounds and the GPS alarm icon blinks.

When “Alarm Select” is set to “RX” or “Memory,” this

setting is enabled.

•Limited: The transceiver sounds 3 beeps and the

GPS alarm icon blinks when the target

enters the 500 meter range.

•Extended: The transceiver sounds 3 beeps and the

GPS alarm icon blinks when the target

enters the 1 kilometer range.

•Both:

The transceiver sounds a beep and the

GPS alarm icon blinks when the target

enters the 1 kilometer range, and sounds

3 beeps and the icon blinks when it enters

the 500 meter range.

When the target exits the 500 meter

range, but is still in the 1 kilometer range,

the icon continues to blink, but no beeps

sound.

Example:

When a target enters in the active alarm range (500

meter or 1 kilometer range, depending on the setting),

the GPS alarm sounds and the GPS alarm icon blinks.

Your

position

Extended range

( Approximate 1 km,

1094 Y)

Limited range

( Approximate 500 m,

547 Y)

Beeps one times Beeps three times

GPS items (Continued)

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды