Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 172 / 273

MENU SCREEN

9-29

Position

GPS > GPS TX Mode > D-PRS > TX Format > Object

Position

Displays the position information of the Object.

Push [QUICK] to open the window shown below.

TIP:

When you select “Capture From GPS” or “Set

From GPS Memory,” you can capture the position

from the GPS, or set the Object’s position from the

GPS memory. (p. 5-18)

Entering the latitude

1. Rotate [DIAL] to select “Edit,” then push [

•Displays the POSITION EDIT screen.

2. Select “LATITUDE,” then push [

•Displays the LATITUDE screen.

3. Rotate [DIAL] to enter the latitude.

Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards.

To enter a north latitude, select “N,” and to enter a

south latitude, select “S.”

4. After entering, push [

Entering the longitude

5. Select “LONGITUDE,” then push [

•Displays the LONGITUDE screen.

6. Rotate [DIAL] to enter the longitude.

Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards.

To enter an east latitude longitude, select “E,” and to

enter a west longitude, select “W.”

7. After entering, push [

Entering the altitude

8. Select “ALTITUDE,” then push [

•Displays the ALTITUDE screen.

9. Rotate [DIAL] to select between plus and minus.

10. Push [MW] to move the cursor forwards.

11. Rotate [DIAL] to enter the altitude.

Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards.

12. After entering, push [

13. Select “<<Write>>,” then push [

•

The confirmation dialog “Write?” is displayed.

14. Select <YES>, then push [

•Writes the entered position data.

15. Push [



TIP:

The number of characters you can enter

in “Comment” differs, depending on the “Data

Extension” and “Altitude” settings.

After entering the position data

Data Extension

(Default: OFF)

GPS > GPS TX Mode > D-PRS > TX Format > Object

Data Extension

Select whether or not to transmit the Course/Speed

data or Power/Height/Gain/Directivity data along with

the position data in the D-PRS mode.

•OFF:

Does not transmit any information.

•Course/Speed: Transmits the Course and Speed

data along with the position data.

•Power/Height/Gain/Directivity:

Transmits the Power, Height, Gain

and Directivity data, along with the

position data.

Only the Icom transceivers, ID-

51A/E PLUS, ID-51A/E PLUS2,

ID-5100A/E, and ID-4100A/E, can

receive Power, Height, Gain and

Directivity data. (As of April 2017)

TIP:

The number of characters you can enter

in “Comment” differs, depending on the “Data

Extension” and “Altitude” settings.

Course

(Default: 0º)

GPS > GPS TX Mode > D-PRS > TX Format > Object

Course

Set the Object’s course to between 0º and 360º.

This item is displayed when “Data Extension” is set

to “Course/Speed.”

Speed

(Default: 0mph)

GPS > GPS TX Mode > D-PRS > TX Format > Object

Speed

Set the Object’s speed to between 0 and 1150 mph.*

* If the Speed unit is set to “km/h,” select between 0 to 1850

km/h, or set to “knots,” select between 0 and 999 knot.

(p. 9-64)

This item is displayed when “Data Extension” is set

to “Course/Speed.”

GPS items (Continued)

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды