Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 117 / 273

GPS OPERATION

5-34

The GPS Logger function enables you to save the

position data from a GPS receiver into a microSD card

as a log.

The GPS Logger saves Latitude, Longitude, Altitude,

Positioning state, Course, Speed and Date.

If you use this GPS Logger while driving, you can

check your driving history on a mapping software.

GPS Logger operating outline

To use GPS Logger function, perform following

operations.

1. Insert a microSD card*.

*User supplied

2. Check whether or not the GPS receiver is

receiving your position data.

(p. 5-2)

3. Turn ON the GPS Logger function.



Completed! The GPS Logger function starts.

NOTE:

• The GPS logger function requires a microSD card

(User supplied).

• Once the GPS logger function is turned ON, the

transceiver continuously saves the position data

from the GPS receiver, even if the transceiver is

turned OFF, then ON again. To cancel this function,

turn OFF the function. While this function is ON,

and when the transceiver is turned OFF, the log file

will be closed. Then the transceiver is turned ON

and Positioning is carried out by the GPS receiver,

a new log file will be created.

• When the microSD card is full, this function will be

automatically paused.

GPS Logger operation

Select whether or not save your route as a log.

When the GPS Logger function is ON, the transceiver

saves the position data from GPS receiver into

microSD card in a specified time interval.

The saved GPS sentences are GGA, RMC, GSA and

VTG.

GPS > GPS Logger >

GPS Logger

1. Push [MENU].

2. Rotate [DIAL] to select “GPS,” then push [

3. Select “GPS Logger,” then push [

•Displays the GPS LOGGER screen.

4. Select “GPS Logger,” then push [

5. Select “ON,” then push [

6. Push [MENU].

• Returns to the standby screen, and the GPS Logger

function starts.

Setting the GPS record interval

For example, when you are walking and if the time

interval is set to “1sec,” a lot of position data is saved

at near place. Select the GPS Logger function record

interval to suit your travel speed.

(Default: 5sec)

GPS > GPS Logger >

Record Interval

1. Push [MENU].

2. Rotate [DIAL] to select “GPS,” then push [

3. Select “GPS Logger,” then push [

4. Select “Record Interval,” then push [

•Displays the “Record Interval” screen.

5. Select a record interval.

•Options: Set to between 1, 5, 10, 30 and 60

seconds.

6. Push [MENU].

• Returns to the standby screen.

GPS Logger function

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды