Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 22

Страница: 22 / 80

New2001

BATTERY CHARGING

New2001

■

Regular charging

Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.

Battery icon

When the transceiver’s power is OFF, the charging icon se-
quentially shows “

,” “

” and “

” along with “Charging...”

while charging. The icon disappears when the battery pack is
completely charged.

When the transceiver power is ON, the battery icon sequen-
tially shows “

,” “

” and “

” while charging,

and the icon disappears when the battery pack is completely
charged.

Charging note

• Be sure to turn the transceiver power OFF. Otherwise the

battery pack will not be charged completely or will take
much longer to charge.

• External DC power is possible when using an optional CP-

12L, CP-19R or OPC-254L. The attached battery pack is

also charged simultaneously, except during transmit (see p.

18 for more details).

• The external DC power supply voltage must be between

10–16 V to charge the battery pack and when operating us-
ing an OPC-254L.

• BC-167S

• CP-12L

(Optional)

• OPC-254L

(Optional)

to AC outlet

to cigarette lighter
socket (12 V DC)

to 12 V DC
(power supply)

White:

Black:

Transceiver

to
[DC IN]

Turn power OFF while
charging the battery pack.

The  BC-167SA,
BC-167SD  and
BC-167SV  have
different shapes.

BP-271

• CP-19R

(Optional)

• Charging period

(approximately)

BP-271: 6 hours
BP-272: 9 hours*

*For USA version
The transceiver stops

charging  the  battery
pack  after  7.5  hours
have  passed,  even
if  the  BP-272  is  not
completely charged.

Содержание D-STAR ID-31A; D-STAR ID-31E

















































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Инструкция по эксплуатации

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды