Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 67 / 293

DR MODE <ADVANCED>

4-26

Repeater list programming (Continued)

■

9. Duplex direction setting

• This item appears only when “YES” is selected in

[7. Access repeater setting].

• “DUP

–

” is automatically set when the access re-

peater frequency is programmed in [8. Access re-
peater frequency programming].

• If necessary, you can change the duplex direction.

Push D-pad(



) to select “DUP,” and then push D-

pad(Ent).

Push D-pad(



) to select the duplex direction.

• OFF : Turn the duplex function OFF.

For a simplex operation, this item MUST be set

to “OFF.”

• DUP– : The transmit frequency shifts down from the re

ceive frequency by the offset amount.

• DUP+ : The transmit frequency shifts up from the re

ceive frequency by the offset amount.

After setting, push D-pad(Ent).

10. Frequency offset programming

• This item appears only when “YES” is selected in

[7. Access repeater setting].

• The offset value* is automatically set when the ac

cess repeater frequency is programmed in [8. Ac-
cess repeater frequency programming].

*The default value is differ depending on the version.

• If necessary, you can change the frequency off

set.

Push D-pad(



) to select “OFFSET FREQ,” and then

push D-pad(Ent) to enter the frequency offset edit
mode.

• A cursor appears and blinks.

Rotate [DIAL] to input the frequency offset.

Push to move the cursor backward, or push to
move the cursor forward.

Repeat steps

and

to enter the frequency off-

set.

After entering, push D-pad(Ent).

11.

Position data accuracy level setting

When the Repeater Search function is not used, or

the distance between your position and a repeater
is not displayed, select “OFF.”

Push D-pad(



) to select “POSITION,” and then

push D-pad(Ent).

Push D-pad(



) to select the position data accuracy

level.

• None

: Select when the repeater has no position

data.

• Approximate : Select when the programmed position

data is approximate.

• Exact

: Select when the programmed position

data is exactly correct.

After setting, push D-pad(Ent).

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды