12
USING A MICROSD CARD
12
12-7
Push [MENU]
q
.
Push D-pad(
w
) to select the root item (“SD Card”),
and then push D-pad (Ent).
Push D-pad(
e
) to select “Setting Save,” and then
push D-pad (Ent).
Push D-pad(
r
) to select “<<New File>>,” and then
push D-pad (Ent).
• The FILE NAME screen is displayed.
Push [CLR]
t
to delete the previously programmed
character.
• Push [CLR]
to delete the selected character, sym-
bol or number.
When the cursor does not select a character, the previ-
ous character is deleted.
If [CLR]
is held down, all the characters are de-
leted.
Rotate [DIAL] to select a desired character.
y
• The selected character blinks.
• Push D-pad(
) to move the cursor right or left.
• While selecting a character, push
to change the
character to a upper case or lower case letter.
• While selecting a digit, push
to open the input mode
selection window.
• A space can be selected, even for any input mode se
-
lected.
• Push [CLR]
to erase the selected character, or hold
down [CLR]
to continuously erase the characters
after the cursor.
• See page 4-2 for programming details.
(
☞
Continued on the next page)
Character type
selection window
D-pad
(
�
)
(Ent)
■
Save with a different file name
Previous view
