Icom D-STAR ID-31A; D-STAR ID-31E страница 268 Скачать руководство пользователя

Страница: 268 / 293

OTHER FUNCTIONS

11-15

Cloning function (Continued)

■

Transceiver-to-Transceiver cloning using a cable

“CLONE” screen

“CLONE-OUT” screen
(While sending data)

Return to the “CLONE”
screen

Connects two ID-31A/E (master and sub transceiver)
using a stereo audio cable (purchase locally).

Use the stereo audio cable (3.5 (d) mm;

⁄

″

), purchase

locally.

* According to a stereo audio cable may not be used for clon-

ing.

Turn OFF the both master and sub transceiver.

Connect a stereo audio cable between master and

sub transceiver at right.
At the sub transceiver, while holding down both [M/

CALL]

and [FM/DV]

, push

to select

cloning stand-by mode.

• “CLONE” screen appears.

At the master transceiver, while holding down both

[M/CALL]

and [MENU]

, push

to se-

lect cloning master mode.

• “CLONE Master” screen appears.

At the master transceiver, push [PTT].

• At the sub transceiver, “CLONE-IN” screen appears.
• At the master transceiver, “CLONE-OUT” screen ap

pears.

When cloning is completed, the master transceiver

returns to “CLONE Master” screen.

• The sub transceiver displays “CLONE End” screen.
• If you have another ID-31A/E to cloning, replace the sub

transceiver and then push [PTT] of the master transceiv-
er.

Reboot the sub transceiver to enable the cloned

setting.

•

Connections

to [SP] jack

3.5 mm (d);

⁄

″

Stereo plug

• Stereo plug (purchase locally)

Less than

4.5 mm; 0.17

″

Master transceiver

(sends a cloning data)

Sub transceiver

(receives a cloning data)

•

Screen of the master transceiver

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды