Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 255 / 293

OTHER FUNCTIONS

11-2

■

Using the DTMF memory

The transceiver can stores up to 16 channels of DTMF
memory with 24-digit DTMF code.

DTMF code programming

Push [MENU]

to select the MENU list screen.

To display the DTMF MEMORY screen, push

D-pad(



) to select the root item (DTMF/T-CALL),

and then push D-pad(Ent) to go to the next level.

• DTMF memory channel list (d0 to d#) is displayed.

Push D-pad(



) to select the desired DTMF memory

channel, then push

Push D-pad(



) to select “Edit, ”then push D-pad(Ent)

to enter DTMF memory edit mode.
Rotate [DIAL] to select the desired code, the push

D-pad(Ent) to set the code.

Repeat the above step to enter the desired DTMF

codes.

• Push

to move the cursor backward, or push

move the cursor forward.

* When the cursor is on the 24th digit, the cursor only can

be move to backward.

• Push [CLR]

to delete the selected code.

• When the cursor does not select a character, the previ

ous character is deleted.

If [CLR]

is held down, all the characters are de-

leted.

When all digits are set, push D-pad(Ent).

• The entered DTMF codes are stored into the DTMF

memory channel, and automatically return to DTMF
memory screen.

Push [MENU]

to return to the operating screen.

DTMF memory edit mode

In case of a DTMF code
has been stored

Example:

Stores the DTMF code, “012345” into the

DTMF memory channel “d0.”

Rotate [DIAL] to select the
desired code

Push D-pad(Ent)

Push [MENU]

Blinks (during character select)

Stored DTMF code

Cursor

D-pad

(

�

)

(Ent)

[DIAL]

Push

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды