Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 217 / 293

MENU SCREEN OPERATION

10-30

GPS items (Continued)

■

<<GPS Logger Only>>

GPS > GPS Logger > <<GPS Logger Only>>

The transceiver switches into an exclusive GPS logger mode where only
the logger is functioning.

• Select “Internal GPS” or “External GPS” in GPS Select screen and in

sert a microSD card.

• During the exclusive GPS logger mode, the transceiver's transmission

and reception are disabled.

To cancel the exclusive GPS logger mode, reboot the transceiver.

Push D-pad(Ent).

D-pad

(

�

)

(Ent)

Push D-pad(



)) to select “YES,” and then push D-pad(Ent).

• When the GPS logger function is set to “ON,” the GPS logger mode is started

immediately after pushing D-pad(Ent).

GPS TX Mode

(Default: OFF)

GPS > GPS TX Mode(GPS TX MODE)

Select a GPS transmission mode to send position data received from a
GPS receiver while in the DV mode.

• OFF

: Position data is not transmitted.

• GPS (DV-G) : Transmits position data in NMEA format. (the TX GPS

mode is “GPS”)

• GPS-A (DV-A) : Transmits position data in the format corresponding to D-

PRS. (the TX GPS mode is “GPS-A”)

In the GPS-A mode, the normal GPS-A codes are trans-

mitted to the PC connected to the ID-31A/E.

GPS-A code is based on APRS

code. (APRS

: Auto-

matic Packet Reporting System)

When “GPS” or “GPS-A” is selected, the slow-speed data communica-

tion is disabled. (p. 4-12)

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды