Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя

Страница: 210 / 293

MENU SCREEN OPERATION

10-23

Manual Position

(Default: LATITUDE : 0°00’00”N LONGITUDE :

0°00’00”E ALTITUDE : ------m)

GPS > GPS Set > Manual Position(MANUAL POSITION)

Manually enter the latitude, longitude and Altitude of your current position.

The received position data can be captured by selecting “Capture From GPS”

when position data is received from either the internal or an external GPS.

(p.

5-2)

GPS Indicator

(Default: ON)

GPS > GPS Set > GPS Indicator(GPS INDICATOR)

Select whether or not to display the GPS icon(

• OFF : The GPS icon is not displayed.
• ON : The GPS icon appears

when valid position data is received, and

blinks when no position data is received.

Selected GPS

receiver

Not connected

Connected/

Searching

Connected/

Received

Internal GPS

–

Blinks

Appears

External GPS

Not displayed

Blinks

Appears

*No icon appears when “Manual” is selected in the GPS select item.

Position Format

(Default: ddd°mm.mm')

GPS > GPS Set > Position Format(POSITION FORMAT)

Select either the ddd°mm.mm’ or ddd°mm’ss" format to display position
information.

Altitude/Distance Units

(Default: ft/ml*)

GPS > GPS Set > Altitude/Distance Units(ALT/DST UNITS)

Select either the meter or feet/mile format to display the distance and el-
evation.

The default setting is differ, depending on the version.

Speed Units

(Default: mph*)

GPS > GPS Set > Speed Units(SPEED UNITS)

Select between either the km/h, mph or knots format to display the speed.

The default setting is differ, depending on the version.

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренды по названию

Популярные бренды