manualshive.com logo in svg

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Поделиться
Скачать
Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 206

10

MENU SCREEN OPERATION

10

10-19

NOTE:

•  The  folder  name  is  automatically  created,  as  shown  in  the  example 

below;  Recording date : 2011/9/1

  Folder name 

:  20110901

•  The file name is automatically created, as shown in the example be

-

low; 

Recording date : 2011/9/1 15:30:00

  Folder name 

: 20110901_153000

•  The  voice  audio  is  recorded  onto  a  microSD  card,  and  saved  in  the 

“wav” format.
The recorded voice audio can also be played back with a PC.
The extension, “wav,” is not displayed on the transceiver

’

s screen.

REC Mode 

(Default: TX&RX)

Voice Memo > QSO Recorder > Recorder Set > REC Mode(REC MODE)

Records both the transmitted and received audio as the default setting.

• TX&RX  :  Records both the transmitted and received voice audio.
• RX Only : Records only the received voice audio.

When transmitted while recording

When “OFF” is selected in File Split, the recording is paused. After finishing 
the transmission, the recording resumes.
When “ON” is selected in File Split, a new file is automatically created, and 
the transmitted voice audio is recorded into the new one.

RX REC Condition 

(Default: Squelch Auto)

Voice Memo > QSO Recorder > Recorder Set > RX REC Condition(RX 
REC CONDITION)

Select whether or not the squelch status affects the RX voice audio record-
ing.

• Always 

:  The  transceiver  always  records  the  RX  voice  audio  re

-

gardless of the squelch status. 

• Squelch Auto :  The transceiver records the RX voice audio only when a 

signal is received (the squelch is opened).

 

   When the squelch closes while recording, the recording 

will continue for 2 seconds, and then pause.

When “ON” is selected in File Split, and if the squelch either opens or 

closes while recording, a new file is automatically created.

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды