3
DR MODE <BASIC>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-3
■
Making a Gateway call
To call a station through your local area (access) repeater, gateway repeater, the internet and then to your destina-
tion repeater.
D
Making a CQ call through a gateway re-
peater (Gateway CQ)
This section describes how to make a CQ call through
a gateway repeater.
Example:
Making a gateway CQ call to (Japan; Hi-
rano430) from the “Hamacho430” repeater.
Hold down
q
for 1 second.
• The DR mode is selected.
Push D-pad(
w
) to select “FROM.”
Rotate [DIAL] to select “Hamacho430.”
e
r
Push D-pad(
) to select “TO,” and then push D-pad(Ent).
Push D-pad(
t
) to select “Gateway CQ,” and then
push D-pad(Ent).
• The REPEATER GROUP screen is displayed.
Push D-pad(
y
) to select “11: Japan” (the repeater
group where your destination repeater is listed), and
then push D-pad(Ent).
Push D-pad(
u
) to select “Hirano430,” and then push
D-pad(Ent).
• “Hirano430” is displayed on “TO.”
While holding down [PTT], speak into the micro-
i
phone at your normal voice level.
• The TX/RX indicator lights red.
• The S/RF meter shows the transmit output power level.
Release [PTT] to receive.
o
JM1ZLK calling
through JP1YIU
Port A*...
‘JM1ZLK calling
through JP1YIU
Port A*...
’
INTERNET
[DIAL]
[PTT]
To maximize the readability of your signal, hold the
microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak at a normal voice level.
Hamacho430
repeater
Hirano430
repeater
Hamacho area
(Tokyo)
Hirano area (Osaka)
Caller:
JM1ZLK
Called
Means this repeat-
er is programmed
as the 3rd of the
635 repeaters on
the repeater list.
Shows the transmit
output power level
Hirano430 call sign
scrolls with “/.”
Settings are
complete
Shows the high-
lighted name’s
call sign
Select “11: Japan”
where “Hirano430”
repeater is listed.
Shows it is a re-
peater for Gate-
way call
* Set the repeater node to ‘B’ for 430 MHz band, when you
use in other than Japan. See page 3-1 for details.
Previous view
