Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 179

Страница: 179 / 293

PRIORITY WATCH

9-26

When a signal is received.

• When “ON” is selected.

When a signal is received on the priority channel,

the VFO mode is automatically selected. The “PRIO”
icon blinks.

Push [CLR]

to resume the priority scan. Push

it again to cancel the scan.

* The scan pause timer and resume settings are the

same as for a normal scan.

• When “Bell” is selected.

When a signal is received on the priority channel,

a beep sounds and the “PRIO” icon blinks. The DR
mode scan resumes.

Blinks

Resumes in the DR mode.

Automatically changes to the VFO mode.

DR MODE SCAN AND VFO FREQUENCY (Continued)

■

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды