Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 167

Страница: 167 / 293

PRIORITY WATCH

9-14

When a signal is received.

• When “ON” is selected.

When a signal is received on the priority channel,

the Call channel mode is automatically selected.
The “PRIO” icon blinks.

* The scan pause timer and resume settings are the

same as for a normal scan.

• When “Bell” is selected.

When a signal is received on the priority channel,

a beep sounds and the “

” icon blinks. The VFO

scan resumes.

Blinks

Automatically changes to the Call channel mode.

Remains in the VFO mode.

Blinks

VFO SCAN AND CALL CHANNEL (Continued)

■

Previous view

Содержание D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды

Icom D-STAR ID-31A; D-STAR ID-31E, Расширенные инструкции

Результаты поиска

Содержание D-STAR ID-31A; D-STAR ID-31E

Отзывы:

Бренды по названию

Популярные бренды